Lab work bench Accessories
224 Chair with Tubular Base
A Tech-Air technician’s chair built with ergonomic details to allow the technician to sit comfortably for hours at a time. This chair has a contoured seat which is adjustable with the aid of a handle activated air cylinder. Its back is adjustable to provide continual back support.
The five leg anti-tip tubular base contains easy glide rollers and a chrome foot support. Covered in a heavy gauge grey expanded vinyl, this Tech-Air chair is a welcome addition to laboratories and industrial locations where employees must sit for extended periods of time. The air cylinder has a five year guarantee. It is available in grey from stock or custom colors at an additional charge.

Shipping Wgt.: 37 lbs [16.8 Kg]
Unit Dimensions: Seat = 21” wide x 19” deep x 3” thick [53.3cm x 48.3cm x 7.6cm]
Standard Chair = 19 - 24 1/4” adj. seat height x 18” diameter [61cm - 73.7cm x 45.7cm]Various heights
available at additional charge.
220 Nylon Coil Air Hose
Coiled nylon air hose with 1/4” [0.6cm] NPT swivel fittings both ends. 10 feet (3 meters) in length with coil extended fully.
Shipping Wgt.: 1 lb [0.5 Kg]
Unit Dimensions: 6” diameter x 9” wide (compressed) [15.2cm x 22.9cm]

221 Rapid Connect/Disconnect
Air coupler designed for rapid connection or disconnection of 1/4” [0.6cm] NPT air line. Zinc plated for extended service.
Shipping Wgt.: 1 lb [0.5 Kg]
Unit Dimensions: 2 7/8” long x 3/4” wide [7cm x 2cm]
210-Cf cast flange
Designed for use with 3/8" NPT air or gas valves, this chrome plate, cast bronze flange provides an aesthetic positive connection to all 3/8" air or gas connections.
Shipping Wgt.: 1 lb [0.5 Kg]
Unit Dimensions: 2 1/2” diameter x 2 1/4” deep [6.40cm x 5.70cm]

210-90 Turret
A 90 degree turret for mounting air or gas valves at a 90 degree angle to tabletop. 3/8” [1cm] NPT pipe connection.
Shipping Wgt.: 1 lb [0.5 Kg]
Unit Dimensions: 3” high x 2” diameter [7.6cm x 5.1cm]

210-0 Bench Mounted Flange
A finely finished chrome plated cast bronze 3/8” [1cm] NPT fitting for mounting single air, gas or water valves.
Shipping Wgt.: 1 lb [0.5 Kg]
Unit Dimensions: 1 13/16” wide x 2 3/4” long [5cm x 7cm]
210A Air Valve
Tapered air valve with positive lever shut-off control and 3/8” [1cm] NPT pipe connector. Chrome plated with rear chrome backplate.
Shipping Wgt.: 1 lb [0.5 Kg]
Unit Dimensions: 3/8” wide x 11/16” long [1cm x 2cm]
210G Gas Valve
Tapered air valve with positive lever shut-off control and 3/8” [1cm] NPT pipe connector. Chrome plated with rear chrome backplate.
Shipping Wgt.: 1 lb [0.5 Kg]
Unit Dimensions: 3/8” wide x 11/16” long [1cm x 2cm]