Bench top dust collectors accessories.
66C-1 GRIND-N-TRAY
A single shielded tray for use in collecting dusts created by handpiece grinding. This tray is designed to fit comfortably into existing bench drawers and contains a bottom suction hole with cut-off.
An excellent accessory when used in conjunction with the 66D Readi-Vac or other suction source. Its clear acrylic shield “flips up” to provide eye protection from rotating handpiece grindings, while channeling dusts into the bottom suction opening of the tray. Folds down into compact 10” wide x 6” deep x 1 1/2” high [25cm x 15cm x 4cm] for easy storage in bench drawer. Finished in a durable, baked coating.
Shipping Wgt.: 1 lb [0.5 Kg]
Unit Dimensions: 10” wide x 6” deep x 1 1/2” high [25cm x 15cm x 4cm]

66C-2 GRIND-N-TRAY
Identical to the 66C-1 Grind-N-Tray except the tray is supplied with two clear acrylic shields for maximum eye protection and collection of dusts created by handpiece operation.
Compact and folds into 10” wide x 6” deep x 1 1/2” high [25cm x 15cm x 4cm] for easy storage in bench drawer. Finished in a durable, baked coating.
Shipping Wgt.: 1 lb [0.5 Kg]
Unit Dimensions: 10” wide x 6” deep x 1 1/2” high [25cm x 15cm x 4cm]
66C-3 Magnetized Flange
A 3” [7.6cm] magnetized flange with clamp for use with a dust collector to provide a suction hook-up to the underside of a bench drawer with the aid of 3” [7.6cm] diameter flexible ducting.
Shipping Wgt.: 1 lb [0.5 Kg]
Unit Dimensions: 3” diameter x 1/2” high [8 cm x 1cm]
66C-5 Aluminum Flange
A 3” [7.6cm] diameter aluminum flange for mounting onto splash hoods or bench risers to provide a rigid connection for attachment of flexible ducting.
Shipping Wgt.: 1 lb [0.5 Kg]
Unit Dimensions: 4” long x 4” wide x 1 1/2” high [10cm x 10cm x 4cm]
66C-10 Cut-Out
A flanged cut-out for mounting onto splash hood or riser to cut-off a suction source. Specify 3” [7.6cm] or 4” [10cm] diameter when ordering.
Shipping Wgt.: 1 lb [0.5 Kg]
Unit Dimensions: 3” long x 3” or 4” diameter
[8cm x 8cm or 10cm]
210T In-Drawer Suction Attachment
Designed to be placed in the center drawer of a technicians bench. Complete with clear acrylic Sta-Kleen shield, this delivers suction to users of handpieces while protecting technician from grinding and polishing dusts created by the handpiece. Two trays located either side of suction area hold burs, mandrels and mounted points when not in use. Shipped in a durable, baked finish. Please specify if special color required.
Shipping Wgt.: 5 lbs [2.3 Kg]
Unit Dimensions: 15 1/2” wide x 18” deep [39cm x 46cm] with rear oval suction inlet
Height: 2 1/2 inches
66C-4 FLEXI-HOSE
Available in standard 3” [7.6cm] or 4” [10cm] diameter for use with dust collector. Sold per foot in 1 to 25 foot lengths.
LARGER SIZE FLEXI-HOSE
AVAILABLE AT ADDITIONAL COST.
Shipping Wgt.: 1 lb [0.5 Kg]
Unit Dimensions: 3” diameter [8cm diameter]
66C-6 Clamps
Available in standard 3” [7.6cm] or 4” [10cm] diameter for use in securing flexible ducting to rigid 3” [7.6] or 4” [10cm] diameter connections.
Shipping Wgt.: 1 lb [0.5 Kg]
Unit Dimensions: 3” or 4” diameter [8cm or 10cm]
66C-7 “T” branch connection
A “T” connection for dividing a single air flow source into two positions. Supplied in 3” [7.6cm] diameter size unless otherwise specified. Finished in a durable, baked coating.
Shipping Wgt.: 1 lb [0.5 Kg]
Unit Dimensions: 3” high x 3” long x 3” diameter [8cm x 8cm x8cm]
66C-13 Branch Connection
A 3” [7.6cm] diameter Branch connection manufactured of sheet steel. Finished in a durable, baked coating.
Shipping Wgt.: 3 lbs [1.4 Kg]
Unit Dimensions: 3” diameter [8cm]
66C-12 Elbow
A 3” [7.6cm] diameter 90 degree elbow manufactured of sheet steel.
Shipping Wgt.: 3 lbs [1.4 Kg]
Unit Dimensions: 3” diameter [8cm]

Replacement filters for dust collectors
NO. 66B Filters
Set of 6” x 6” [15cm x 15cm] fiberglass filters for replacement into the No. 66 Bench Top Porta-Vac.
Shipping Wgt.: 1 lb [0.5 Kg]
Unit Dimensions: 6” x 6” [15cm x 15cm]
76DF Filters
Replacement fiberglass filters for 76D-0 and 76D-3 Bench top dust collector - 10” x 12” x 2” [25cm x 30cm x 5cm].
Shipping Wgt.: 1 lb [0.5 Kg]
Unit Dimensions: 10” x 12” x 2” [25cm x 30cm x 5cm]
NOTE: The fiberglass filters described above will not be effective for gypsum dust.
They cannot be used for Aluminous Oxide (ALO). They are effective with Porcelain,
metal, and acrylic dusts.