 |
|
|
Boil-Out Units Handler manufactures two basic boilout/curing and boilout/curing/washout units. Single curing, boilout or washout units are built on a custom-made basis. All units are built to fit into existing steel cabinets or Handler’s louvered cabinets and should not be installed without a steel cabinet. Each may be fabricated to be compatible with manufactured gas, natural gas, or electric. |
|
|
|
|
 |
26105SSWCg Boilout/Curing Unit Handler introduces a New Boilout/Washout/ Curing Unit complete with vented cabinet. Built & designed by Handler THE NEW 26105SSWC will provide your prosthetics laboratory with years of service at almost 40% savings over competitive units. Vented cabinet with internal shield, Available with economical gas or electrical fuel, Available with faucet to fill tank, Heavy duty recirculating pump, Four faucet washout-tank-turn on walk away de-wax dentures & partials, Curing unit-holds 8 two flask compresses-16 flasks, Heavy gauge stainless steel-for durability & functionality, Sinks built into stainless steel top with seamless design, Marine Edging keeps water from running off work surface, built by Handler in the U.S.A. Shipping Wgt.: 250 lbs [113.5 Kg] Unit Dimensions: 35” wide x 24” deep x 38” high |
 |
|
 |
26102 Boilout/Curing Unit
A gas fired, double tank boilout/curing unit. Contains two 18 ga. stainless steel tanks: 10” x 14” x 12” deep [25cm x 36cm x 30cm] and 10” x 14” x 12” deep [25cm x 36cm x 30cm] with inside handles. Gas fuel connections are standard 1/2” [1.3cm] NPT. Please specify natural or manufactured gas when ordering. Cabinet top cut-out size: 22 5/8” wide x 17” depth [57cm x 43cm]. Shipping Wgt.: 100 lbs [45.4 Kg] Unit Dimensions: 24” wide x 18” deep x 29” high [61cm x 45.7cm x 61cm] 26102EL Boilout/Curing Unit |
SPECIAL ORDER: CURING TANKS & WASHOUT UNITS: |
|
| Curing tanks and washout units are available on special order as follows: | |
| 26101: Curing Tank Only - 10" wide x 14" depth x 12" deep; 26103: 3 tank Boilout/Curing Tank Unit – Three tanks – 26104: Washout Unit, Only – single tank – 18" wide x 14" depth x 12" deep. |
|
HANDLER WILL BUILD STAINLESS STEEL TANKS AND UNITS TO YOUR SPECIFICATIONS ON SPECIAL ORDER. Note: Tank Covers available at additional costs. |
|
| 26105: Boilout/Washout/Curing Unit A combination boilout/washout/curing unit manufactured of 18 gauge stainless steel with two tanks. Tank sizes are 10” x 14” x 12” deep [25cm x 36cm x 30cm] and 18” x 14” x 10” deep [46cm x 36cm x 25cm]. Each tank has a stainless steel insert to place flasks/presses on top. The unit comes with 4 faucets and pump to recirculate water, as well as filters to filter the wax. Cabinet cut-out size: 30 3/4” wide x 17 3/4” depth [78cm x 45cm]. Shipping Wgt.: 175 lbs [79.4Kg] Unit Dimensions: 32” wide x 23” deep x 38” high [81.3cm x 45.7cm x 74cm] |
|
| 26105EL Boilout/Washout/Curing Unit An electrical version of the appliance above. 220 and 115 Volts are needed to run this unit. Shipping Wgt.: 175 lbs [79.4 kg] Unit Dimensions: 32” wide x 18” deep x 29” high [81.3cm x 45.7cm x 74cm] |
|
Fume Hood FUME HOODS WITH SPECIAL DIMENSIONS AND CFM RATINGS CAN BE BUILT TO YOUR SPECIFICATIONS. CONTACT US FOR A QUOTATION |
|
 |
236 FH Fume Hood
Handler has designed a hood to remove fumes and odors from laboratory processing. It is designed with a 220 CFM suction unit to remove all types of odors.The fume hood is built to be placed directly onto a studded wall, and the exhaust ducted into a suitable location outside your building. It’s 18” deep by 42” wide by 39” high size makes it convenient to install in most laboratories. The fume hood is constructed of heavy gauge sheet metal and finished in a warm grey baked coating. It is available in other |
