 |
|
|
Handler Manufacturing Bunsen BurnersBunsen Burners are available from Handler in two configurations - a standard burner and a burner with a pilot light for quick flame access. Both styles are built for natural and manufactured gas. Please specify when selecting. |
|
 |
10A Bunsen Burner A Bunsen burner made for use with natural gas. Attaches to flexible burner tubing with built-in tapered, serrated connector. This useful laboratory-dental burner is constructed of nickel plated steel. It can be adjusted from sharp to a brush type flame. Shipping Wgt.: 1 lb [0.5 Kg] Unit Dimensions: 2 9/16” high x 2” base diameter [7cm x 5cm] 10 Bunsen Burner |
 |
11A Pilot Burner A sturdily built Bunsen burner with built-in pilot light. Pilot light flame is controlled with the use of an adjusting screw located at the base of the burner. Main burner flame is adjusted to ON or OFF positions with a “Tee” handle located on lower burner value. Manufactured of nickel plated steel with tapered, serrated connector for use with various size flexible tubing. Shipping Wgt.: 1 lb [0.5 Kg] Unit Dimensions: 5” high x 3 1/2” base diameter [13cm x 9cm] 11 Pilot Burner |
 |
11T Bunsen Burner Tubing Pure gum flexible rubber tubing with 1/4” [0.6cm] I.D. for use with all Bunsen burners. NOTE: Sold by the foot. Shipping Wgt.: 1 lb [0.5 Kg] Unit Dimensions: 1/2” diameter [1.3cm] |
 |
|
 |
78-1 Atlas Junior Vibrator A three speed vibrator for use by the dentist or smaller laboratory. This is designed for compactness, longevity and intermittent use. Its 4” [10cm] diameter, removable, rubber covered table top makes it an ideal addition to any small lab workbench where a vibrator will be utilized for short periods. The Atlas Jr. is available in 115 Volts/60Hz. 115 Volts/50Hz, 230 Volts/50Hz, or 230 Volts/60Hz models may be purchased at additional cost. Finished in a durable, baked coating with resista-move rubber suction cupped feet. Shipping Wgt.: 5 lbs [2.3 Kg] Unit Dimensions: 4 1/2” wide x 4 1/2” deep x 4” high [11cm x 11cm x 10cm] |
 |
78-RK Atlas Heavy Duty Tri-Speed vibrator The NEW Handler 78-RK Heavy Duty Vibrator is built for durability and rugged use. The newly designed 78-RK has two frequencies each with variable speed. The HIGH and LOW are variable to allow a technician to vibrate a mixing bowl or flask at the correct speed for the plaster, stone or viscous solution to de-bubble. The fully covered larger rubber table is built to hold larger flasks and mixing bowls. The rubber top is removable for easy cleaning and replacement. Four soft rubber feet hold the 78-RK in place during the heaviest vibrating cycles. The unit is coated with a baked enamel finish. Built to last for many years. Available in standard 115V/60Hz: 115V/50Hz, 220V/50Hz, 220V/60Hz at additional cost. Shipping Weight:13 lbs Unit Dimensions: 8”W x 6 1/2”D x 4 1/2”H |
