Durable Manganese Alloy.

Manufactured of durable bronze manganese alloys, Handler flasks and compresses set an exacting standard for the lab technician.
Handler presses are manufactured of malleable/ductile iron, grey iron, and alloy steels for durability and continued function. We use only the highest quality materials.
44U Atlas Flask

This UPPER Flask is constructed of special alloy bronze to provide years of durable service. Fitted with hardened stainless steel alloy rear tapered guide pins, this ejector type flask has long been a favorite of leading Prosthodontists, dental schools and commercial laboratories. Dropped forged with glass-like smooth surfaces, models are easily ejected with the aid of the bottom ejection disc.
Shipping Wgt.: 3 lbs [1.4 Kg]
Unit Dimensions: 4” long x 3 3/4” wide x 2 1/4” high [10cm x 10cm x 6cm]
44L Atlas Flask
This LOWER Flask is constructed the same as the Upper Atlas Flask, but with a slanted heel section to accommodate cases with high condyles. Its tapered rear guide pins, smooth interior and special bronze alloy provide ease of function during flasking and de-flasking operations.
Shipping Wgt.: 3 lbs [1.4 Kg]
Unit Dimensions: 4” long x 3 3/4” wide x 2 1/4” high [10cm x 10cm x 6cm]
22CU Upper
The 22C UPPER denture flask is a frequently used all purpose denture flask. Designed with side guide lugs for precise alignment, the three piece flask contains a large knock-out disc in the lower portion for ease of model ejection. Technicians have found it ideally suited for flasking two or three partials and/or bridges at one time.
Shipping Wgt.: 3 lbs [1.4 Kg]
Unit Dimensions: 4 1/4” long x 3 1/4” wide x 2 1/4” high [11cm x 8cm x 6cm]
44G Atlas Giant Flask
When conventional size flasks are not large enough, the 44G should be utilized. Cast of bronze alloy, the 44G is widely used in reconstructive maxillo-facial procedures. The 44G is fitted with three separate sections, a bottom K.O. disc and rear, tapered stainless steel guide pins for easier flasking and de-flasking.
Shipping Wgt.: 5 lbs [2.3 Kg]
Unit Dimensions:
4 5/8” long x 4 3/8” wide x 2 3/4” high [12cm x 11cm x 7cm]
44D: Bronze K.O.
Disc for 44 UPPER, LOWER, and Atlas GIANT Flasks. Also fits varsity Flasks.
Shipping Wgt.: 1 lb [0.5 Kg]
Unit Dimensions: 2 7/16” diameter x 3/16” high [7cm x 1cm]

22D: Bronze K.O.
Disc for 22C UPPER and LOWER Flask.
Shipping Wgt.: 1 lb [0.5 Kg] Unit Dimensions: 2 5/8” diameter x 3/16” high [7cm x 1cm]
22CL Lower
The 22C LOWER denture flask is constructed of the same heavy bronze alloy as the 22C UPPER. However, the Lower is designed with slanted heel section to accommodate cases with high condyles.
PLEASE SPECIFY UPPER OR LOWER WHEN ORDERING FLASKS.
Shipping Wgt.: 3 lbs [1.4 Kg]
Unit Dimensions: 4 1/4” long x 3 1/4” wide x 2 1/4” high [11cm x 8cm x 6cm]

Denture Flask Compresses
61A One Flask Compress
For use in curing a single flask. Built of bronze alloy with stainless steel compensatory springs.
Provides years of service.
Shipping Wgt.: 7 lbs [3.2 Kg] Unit Dimensions: 4 3/4” long x 2 7/8” wide x 5 3/4” high [12cm x 7cm x 15cm]

61B Two Flask Compress
For use in curing two Flasks simultaneously. Our most popular denture compress is built to hold two conventional flasks. Sturdily built of bronze alloy, its rustproof cast body will provide years of service. Two stainless steel springs give equalized compensatory
pressure during curing operation. A suitable allen wrench, wood capped holding handle and brass lifting handle are supplied with each compress.
Shipping Wgt.: 8 lbs [3.6 Kg] Unit Dimensions: 4 1/8” long x 2 1/2” wide x 7 1/2” high [11cm x 6cm x 19cm]

61C Three Flask Compress
For use in curing three flasks simultaneously, same as above compresses but with three flask capacity.
Shipping Wgt.: 9 lbs [4.0 Kg] Unit Dimensions: 5” long x 2 5/8” wide x 10 3/4” high [13cm x 7cm x 27cm]
33 Little Giant
A Flask Press manufactured for pressing a single flask. Constructed of malleable/ductile iron, the Little Giant will provide years of trouble free service under normal pressing procedures.
Inside dimensions: 5” wide x 4” max. height [13cm x 10cm]. Order with 38A bench clamps.
Shipping Wgt.: 12 lbs [5.4 Kg]
Unit Dimensions: 7 3/4” long x 3 1/2” wide x 7 3/8” high [20cm x 9cm x 19cm]
38 Big Boy Flask Press
A Heavy Duty Single Flask Press manufactured of malleable/ductile cast iron for durability and long wear. Press is provided with alloy steel shaft, grey iron handle and malleable/ductile iron pressure plate. Holes in frame allow for easy bench mounting, or 38A Clamps may be utilized for easy bench mounting and/or removal.
Big Boy Flask presses are designed for the busy laboratory.
Shipping Wgt.: 23 lbs [10.4 Kg]
Unit Dimensions: 10” long x 4 1/2” wide x 8 1/2” high [25cm x 11cm x 22cm]
38B Big Boy Flask Press
A Heavy Duty Two Flask Press manufactured of malleable/ductile cast iron. Features are the same as 38 Press, except this unit is designed to accommodate two flasks simultaneously.
Both 38 and 38B Big Boy Presses are designed for the busy laboratory. May be utilized with 38A Clamps for easy bench mounting.
Shipping Wgt.: 24 lbs [10.9 Kg]
Unit Dimensions: 10” long x 4 1/2” wide x 10” high [25cm x 11cm x 25cm]

39 Deluxe Manual Press
This robust press is built by Handler to give the laboratory technician excellent hand pressing action when trial packing dentures. The Deluxe Press is manufactured from 1” steel plate with a 1”diameter acme threaded center screw.
The large chrome plated handle allows the technician to apply accurate pressure as dictated by the individual case. Should the center screw or threaded insert ever require replacement, both are replaceable. Provided in a durable baked finish with chrome plated steel supports, handle and center screw, this press will prove a welcome addition to your laboratory.
Shipping Wgt.: 24 lbs [10.9 Kg]
Unit Dimensions: 12” high x 6” wide x 12” long [31cm x 15cm x 31cm]

Denture Flask Presses, Fillers, Ejectors, Clamps and Articulators
38A Bench Clamps
For use in mounting Nos 33, 38, 38A presses to tabletop. Cast of aluminum alloy for rustproof protection. Shipped with mounting screws.
Shipping Wgt.: 1 lb [0.5 Kg]
Unit Dimensions: 1” high x 2 1/4” deep x 4” long [3cm x 6cm x 10cm]
35 Spring Filler
A bronze filler which provides flasked cases with compensatory spring action with the aid of two stainless steel springs. Used in Handler presses to provide compensatory spring action during curing of flasked dentures.
Shipping Wgt.: 1 lb [0.5 Kg]
Unit Dimensions: 3 1/2” wide x 2 1/2” deep x 1 1/2” high
[8.9cm x 6.35cm x 3.8cm]

Denture Flask Ejectors and Discs
44A Atlas Flask Ejector
Designed to easily eject poured models from No. 44 Atlas flasks with smooth mechanical action. Spring loaded side levers adjust to Upper or Lower Flask configuration with a quick movement of an indicating lever.
Initial insertion separates mid and lower flask sections; final insertion separates model from mid section.
Shipping Wgt.: 5 lbs [2.3 Kg]
Unit Dimensions: 6 1/2” wide x 3 1/2” deep x 6 1/2” high [16.5cm x 8.9cm x 16.5cm]
47 K O Ejector
Designed for use in ejecting poured models from 22C Denture flasks, ONLY.
Use in conjunction with any Handler Flask Press, the #47 easily ejects models from 22C flasks through smooth mechanical downward action.
Shipping Wgt.: 5 lbs [2.3 Kg]
Unit Dimensions: 5” wide x 4 1/2” deep x 2” high
[12.7cm x 11.4cm x 5.1cm]
42 C & B Press
Built of sturdy cast bronze alloy, the 42 C & B Press is designed to accommodate two C & B Flasks having a maximum height of 1 3/4” [4.4cm] each.
Inside dimensions are 4 1/2” high x 2 1/8” wide [11.4cm x 5.4cm].
NOT for use with 48F Bridge Flask
Shipping Wgt.: 5 lbs [2.3 Kg]
Unit Dimensions:: 2 3/4” long x 2 5/8” wide x 6 1/8” high [7cm x 7cm x 16cm]

42A C & B Compress
Manufactured of cast bronze, the above listed press frame is modified with two stainless steel springs to provide compensatory spring action during the processing of acrylic veneers and bridges. This unit has a one flask capacity.
Shipping Wgt.: 5 lbs [2.3 Kg]
Unit Dimensions: 2 3/4” long x 2 5/8” wide x 6 1/4” high [7cm x 7cm x 16cm]

Articulators
72 Atlas-Apex Type Articulators
Atlas articulators have been used by leading dental technicians and dentists for many years.
The 72 is constructed of bronze castings with a center support for durability and better plaster retention. Machined to produce maximum accuracy for this type articulator, the 72 Apex type articulator provides durable service.

Shipping Wgt.: 1 lb [0.5 Kg]
Unit Dimensions: 3 1/2” wide x 5” deep x 2 1/2” high
[8.9cm x 12.7cm x 3.8cm]
15 Plain Line Articulator
Free from lateral movement with side adjustable screws and adjustable to high or low positions, the plain line articulator is constructed of cast bronze for durable use.
This articulator provides accurate results!

Shipping Wgt.: 1 lb [0.5 Kg]
Unit Dimensions: 3 1/2” wide x 5” deep x 2 1/2” high
[8.9cm x 12.7cm x 3.8cm]
47D De-Flasking Disc
An aid designed to help locate denture teeth in a flask processed denture. The disc will help protect teeth during the deflasking procedure. Made of aluminum, the 47D can be used over and over again. For use in conventional type flasks. Packed 12 discs per box.
Shipping Wgt.: 1 lb [0.5 Kg]
Unit Dimensions: 3” long x 2 3/4” wide x 3/8” high [8cm x 7cm x 1cm]

Bridge and King Size Flasks
48F Bridge Flask
Constructed of cast manganese bronze, this four piece C & B Flask is built for the perfectionist’s use in making processed, temporary splints.
Harder stainless steel tapered pins provide for the precise alignment of the four sections. Its durable construction affords excellent resistance to warpage and distortion during pressing and processing operations.
Use with 61A one flask compress
Inside Dimensions: 2 3/4” long x 1 5/8” wide x 1 1/4” high [7cm x 4cm x 3cm].
Shipping Wgt.: 1 lb [0.5 Kg]
Unit Dimensions: 3” long x 2 3/8” wide x 1 1/2” high [8cm x 6cm x 4cm]

48A Bridge Flask
Acrilan C&B FLASK: A older style C & B Flask for acrylic crowns. Cast in bronze, this C & B Flask is available in a two piece design - 48, three piece - 48A
49A King Size Flask
Dentists and Technicians occasionally require an extra large size flask for a special purpose. These four piece bronze cast flasks with their substantial dimensions will be found suitable for the investing of large prosthetic appliances or several resin bridges, partials or full dentures at one time.
The sections are slightly tapered to allow for easier de-flasking procedures without requiring a special device.
Shipping Wgt.: 7 lbs [3.2 Kg]
Unit Dimensions: 3 3/8” long x 3 1/4” wide x 2 13/16” deep

49B King Size Flask
And Four piece style – 48B Used with 42 Press or 42A Compress
Inside Dimensions:
2-1/2 long x 1-1/4 wide x 1-3/8 height (6.3cm x 3.2cm x 3.5cm)

49C King Size Flask
49C KING SIZE FLASK:
Unit Dimensions: Approx. 7-1/2 wide x 7-1/2 long x 3-1/2" deep

Crown and Bridge Flasks/Presses
48X COM-A-PART Flask
(Round House Type) for shade blending of resin teeth, or Processed Temporary Splints. Flask parts separate readily for ease of processing. Correct size for investing a full arch or a partial case. Supplied with insert and bottom knock-out for easy removal of restoration. Designed to resist warpage and distortion, the cast bronze fitted flask is constructed of solid bronze alloy. Supplied with locking wrench.
Shipping Wgt.: 7 lbs [3.2 Kg]
Unit Dimensions: 3 3/8” long x 2 1/4” wide x 3 1/8” high [9cm x 6cm x 8cm]