Handler Handpieces, Engines and Switches.

Handler built laboratory handpieces and flexible shaft motors are made to exacting standards for the technician. Variable speed foot switches are available for most units, providing flexibility and speed control.
A momentary foot switch is available to quickly activate benchtop polishing motors, model trimmers and dust collectors, see No. 25PC.

One of the highest rated lab handpieces in the industry.

500-III Syncro/Torque
A Handler Exclusive, the Syncro/Torque III is a precision balanced electronic handpiece for detailed, sophisticated lab work. Its hand held micro-motor provides the technician with 0 to 35,000 rpm variable speed which may be preset at the table top control box and varied with an accelerator type foot switch.

The foot switch can also be side mounted as a knee treadle. Changing of standard 3/32” [0.2cm] burs and mandrels is made easy with a twist of the handpiece body to open the collet, and a reverse twist to close. Maintenance is made easy by un-threading the vibration free handpiece to remove the chuck for cleaning of the -collet. The 500-III Syncro/Torque is shipped complete with handpiece, micro-motor, variable speed foot switch and control box.
Shipping Wgt.: 12 lbs [5.4 Kg]
Unit Dimensions: 7 1/8”long x 6 3/4” deep x 2 5/8” high [18cm x 17cm x 7cm]
1920
Full 1/8HP Ball Bearing Motor. Shipped complete with sheath, shaft and variable speed foot switch. Designed to provide user with vibration free, cool running operation after hours of operation. Dual inner shaft wire with new internally designed spring allows excellent torque conversion whether shaft is straight or looped. Rated “BEST” by Master Jewelers.
Shipping Wgt: 10lbs.

1920M
1/8HP Motor only. Replacement
hanging motor for most all Foredom, Pfingst, Grobet, and Buffalo Flexshafts. Ball Bearing-Full 1/8 HP. Shipping Wgt: 7 lbs.

1920M/S
Sheath and Shaft. Replacement sheath/shaft for most all flexshaft motors. Runs cool, provides excellent torque conversion.
Shipping Wgt: 2lbs.

1920F-STH
Outer replacement sheath for most all makes/models of flexshaft motors
Shipping Wgt: 1lb.

1920F-SFT
Inner replacement shaft for most all flexshaft units. Cross wound to provide excellent torque conversion and durability.
Shipping Wgt: 1lb.

1920F-SPG
Inner replacement spring for most all flexshaft units. Shipping Wgt: 1lb.
3030
Handpiece for Flexshaft Units - Fits most popular models of flexible shafts. Designed with a Jacobs Style chuck with key to hold various size burs, mandrels and attachments with shank diameter of 0” to 1/4”. Built with high speed ball bearings for concentricity and durability. Attaches to end of flexible shafts with snap. Shipping Wgt: 3lbs
3060
Doriot Style Handpiece for Flexshaft Units - Fits most popular style flexible shafts. Designed with a lever action for ease of removing 3/32” diameter burs, mandrels and mounted points. Built with high speed ball bearings for concentricity and durability. Attaches to end of flexible shaft with snap. Shipping Wgt: 2 lbs

Lab Foot Switches
25PC Foot Switch
 The 25PC foot switch is designed to function where dusts and damp debris are created. The 25PC contains a heavy, clear vinyl cover bonded to the outside of the momentary foot switch. This switch is an excellent addition to any laboratory where dust and damp debris may be created. Activated from 360 degree area, this switch is rated for use with appliances having a maximum rating of 7 amps at 120 Volts, 1 phase AC.
Shipping Wgt.: 1 lb [0.5 Kg]
Unit Dimensions: 4” diameter x 1 1/4” high [10cm x 3cm]
62FS-V Foot Switch
 Provides variable speed control for flexible shaft motors and similar style motors. Built of heavy gauge sheet steel for durability, this foot control is contains an internal electronic switch for ease of variable switch action. Shipping Wgt.: 4 lbs
62FS Foot Switch
 Provides On/Off continuous action for various dental, jewelry and industrial electrical
products. 6 amp capacity at 115 Volts/ 60 Hz. Push to turn ON - Push to turn OFF. Shipping Wgt.: 4 lbs