32 Model Trimmer
$1,143.33
32 Model Trimmer
32 Model Trimmer Options:
32-SV with Solenoid Valve
32-3214 with Ortho-Angulator
32-WKD with Diamond Wheel
115V/60Hz. Also available in 230V/50Hz, 230V/60Hz and 115V/50Hz at additional cost.
Shipping Wgt.: 55 lbs [22.7 Kg]
Unit Dimensions: 16” D x 15” W x 14 1/2” H [41cm x 38cm x 37cm]
32X Model Trimmer
Model Trimmer Options:
32X-SV with Solenoid Valve
32X-3214 with Ortho-Angulator
32X-WKD with Diamond Wheel
115V/60Hz. Also available in 230V/50Hz, 230V/60Hz and 115V/50Hz at additional cost.
Shipping Wgt.: 55 lbs [22.7 Kg]
Unit Dimensions: 16” D x 15” W x 14 1/2” H [41cm x 38cm x 37cm]
In stock
32 Model Trimmer
32 Model Trimmer
A 12” [30cm] diameter Trimmer designed for the laboratory technician who trims plaster and stone models on a daily basis. Powered by a FULL 1/2 HP ball bearing, capacitor start motor, the 32 features a larger frontal opening and additional grinding capacity to trim models faster and easier.
The swing-open front housing with full wheel radius water spray, internal gutter for water diversion, surrounding drip trough, and motor cover with utility tray, makes this trimmer an excellent addition to the working laboratory. Shipped complete, ready to use with minor set-up; finished with a durable, baked coating.
115V/60Hz. Also available in 230V/50Hz, 230V/60Hz and 115V/50Hz at additional cost.
Shipping Wgt.: 55 lbs [22.7 Kg]
Unit Dimensions: 16” D x 15” W x 14 1/2” H [41cm x 38cm x 37cm]
Weight | 55 lbs [22.7 Kg] |
---|---|
Dimensions | 16” D x 15” W x 14 1/2” H [41cm x 38cm x 37cm] |
Composition: | Cast Iron |
Options: | Available in 1/2 HP See Model 32 |
Additional information
Weight | 56 lbs |
---|---|
Dimensions | 22 × 19 × 18 in |
P32-01 Motor For Trimmer 1/2Hp (32)
P32-01A Motor-Mt Bolts (4/Set)
P32-01B Motor Shaft Keyway
P32-01C Switch On/Off
P32-01D Motor-Line/Cord Set
P32-02 Motor-Base
P32-02A Rear Housing Bolts W/Washers
P32-03 Rear Housing – 12″
P32-03A Drain Hose Adapter
P32-03B Knob W/Stud F/Housing
P32-04 Brass Hub With Set Screw
P32-04A Washer Alum F/Mt
P32-04B Nut For Model Trimmer Hub
P32-05 Back Up Plate, 12″ Metal
P32-07A Tray Work F/Mt 32
P32-07B Knob W/Stud For Work Tray For 31 & 32
P32-07C Hingenpin Stainless Steel
P32-07D Water Inlet Ftg
P32-07E Spray Tube For 12″ Trimmer
P32-07G Spray Tube Clean Out Plug
P32-08 Inlet Tube W/Faucet Adapter
P32-08A Faucet Adapter Only For 31’S And 32’S
P32-08B Water Inlet Tubing Only
P32-09 Drain Hose 42″
P32-10 Model Trimmer Wrenches (Set/2)
P32-11 Motor-Cover For Trimmer 12″
P32-12 Utility Tray Plastic For 32
P32-13 Plastic Knob Only For Door
P32-14 Stainless Stud Only