31 Model Trimmer
$921.79
31 MODEL TRIMMER
MODEL TRIMMER OPTIONS:
31-SV with Solenoid Valve
31-3214 with Ortho-angulator
31-WKD with diamond wheel
115V/60Hz. Also available in 230V/50Hz, 230V/60Hz and 115V/50Hz at additional cost.
Shipping Wgt.: 48 lbs [21.8 Kg] Unit Dimensions: 16” D x 13” W x 12 3/4” H [41cm x 33cm x 32cm]
31X Model Trimmer
Model Trimmer Options:
31X-SV with Solenoid Valve
31X-3214 with Ortho-Angulator
31X-WKD with Diamond Wheel
115V/60Hz. Also available in 230V/50Hz, 230V/60Hz and 115V/50Hz at additional cost.
Shipping Wgt.: 48 lbs [21.8 Kg] Unit Dimensions: 16” D x 13” W x 12 3/4” H [41cm x 33cm x 32cm]
In stock
31 Model Trimmers and Options
31 Model Trimmer “The Professional” A 10” [25cm] diameter model trimmer powered by a full 1/3 HP ball bearing, capacitor start motor. Features include a swing-open front housing for ease of cleaning and wheel changing, internal gutter to facilitate water runoff, full wheel radius water spray for efficient wheel cleaning, drain trough which completely surrounds the model tray to prevent water leakage, large 1” [2.5cm] diameter water exhaust and motor cover. Unit shipped complete, ready to use with minor set-up. Finished with a durable, baked coating.
| Weight | 48 lbs [21.8 Kg] |
|---|---|
| Dimensions | 16” D x 13” W x 12 3/4” H [41cm x 33cm x 32cm] |
| Composition: | Cast Iron |
| Options: | 1/3 HP (Model 31) |
| Instruction Manual | 31 Model Trimmer Manual |
Additional information
| Weight | 48 lbs |
|---|---|
| Dimensions | 22 × 19 × 18 in |
P31-01 Motor for Trimmer 1/3 HP (31, 32X)
P31-01A Motor-Mounting Bolts(Set of 4)
P31-01B Motor Shaft Kenway Sleeves
P31-01C Switch On/Off
P31-01D Motor-Line/Cord Set
31A-C Wheel 10″ MT Coarse
P31-02 Base,10″ Fabmotor Base
P31-02A Rear Housing BLTW/Lock WSH
P31-03 Rear Housing – 10
P31-03A Drain Hose Connection
P31-03B Knob W/Stud for Front Housing
P31-04 Brass Hub With Set Screw
P31-04A Aluminum Washer for MT Hub
P31-04B Model Trimmer Nut Brz
P31-05 Back Up Plate, 10″ Metal
P31-07A Tray Work F/MT 31
P31-07B Knob w/Stud for Work Tray
P31-07C Stainless Steel Hinge Pin
P31-07D Water Inlet Fitting
P31-07E Spray Tube for 10″ Trimmer
P31-07F Rubber Washer for Hub of MT
P31-07G Spray Tube Clean-Out Plug
P31-08 Water Inlet Tube w/Faucet Adapter
P31-08A Faucet Adapter Only
P31-08B Water Inlet Tubing Only
P31-09 Drain Hose – 42″ for 31’s and 32’s
P31-10 Wrenches (Set of 2)
P31-11 Motor-Cover For Trimmer 10″
P31-12 Utility Tray Plastic For 31
P31-13 Plastic Knob Only for Door
P31-14 Stainless Stud Only
P31-15 Set of Bearings for 31 MT
P31-16 Rubber Suction Cups for MT-Set of 2
32-07GK Gasket
