16 CHUK/CHANGER KIT
$519.09
16 CHUK/CHANGER Full Parts and Accessories List:
The 16 Chuk/Changer Kit is shipped complete with chuck accessories as follows:
- P16-15 Arbor Band Chuck
- P16-16 Spiral Tapered Chuck
- P16-19 Stone Chucks
- P16-20 Mandrel (1/64)
- P16-21H Mandrel (1/32)
- P16-8 Collet Wrench
- P16-10RW Clutch
- P16-ADRW Adapter
- P16-5 Master Large Collet
- P16-6 Master Small Collet
26 in stock
A. 16 CHUK/CHANGER KIT
The Handler Chuk/Changer was designed to provide full automatic, precision changing of 1/4” [6.3mm] and 3/32” [2.4mm] diameter burs, mandrels and chuck accessories with the slight movement of a handle while the motor is turning. The Chuk/Changer provides the technician with exacting concentricity and quick, easy changing of various chucks which greatly speeds grinding, polishing and finishing procedures.
The 16 Chuk/Changer is installed on the right side of the lathe and is adaptable to most types of dental motors, including Red Wing and Baldor (special adapter required).
The 16 Chuk/Changer Kit is shipped complete with chuck accessories as follows:
- P16-15 Arbor Band Chuck
- P16-16 Spiral Tapered Chuck
- P16-19 Stone Chucks
- P16-20 Mandrel (1/64)
- P16-21H Mandrel (1/32)
- P16-8 Collet Wrench
- P16-10RW Clutch
- P16-ADRW Adapter
NOTE: Available for left side Model 16L.
Shipping Wgt.: 3 lbs [2.3 Kg]
Unit Dimensions: 8 3/4” L x 4” W x 6 1/4” H [22cm x 10cm x 16cm]
B. 16 CHUK/CHANGER Full Parts and Accessories List:
The 16 Chuk/Changer Kit is shipped complete with chuck accessories as follows:
- P16-15 Arbor Band Chuck
- P16-16 Spiral Tapered Chuck
- P16-19 Stone Chucks
- P16-20 Mandrel (1/64)
- P16-21H Mandrel (1/32)
- P16-8 Collet Wrench
- P16-10RW Clutch
- P16-ADRW Adapter
- P16-5 Master Large Collet
- P16-6 Master Small Collet
| Note | Available for left side Model 16L. |
|---|---|
| Dimensions | 8 3/4” L x 4” W x 6 1/4” H [22cm x 10cm x 16cm] |
| Shipping Wgt | 3 lbs [2.3 Kg] |
Additional information
| Weight | 3 lbs |
|---|---|
| Dimensions | 9 × 7 × 5 in |
P16-1 Special Collet
P16-10RW Clutch Complete for Red Wing
P16-11 Clutch Lining
P16-12 Clutch Lining Screws (3)
P16-15 Arbor Band Chuck 3/4″ Diameter
P16-16 Chuck, Tapered
P16-19 Tooth & Knife Stone Chuck
P16-2 Pop-out Spring
P16-20 S/S Mandrel 1-64 Screw
P16-22 Bearings Set of Two (Front & Rear)
P16-23 Spacer Washers for #16
P16-24 Center Shaft for 16 C/C
P16-25 Recess Collar
P16-26 Press on Retaining Ring
P16-27 C/C Housing Complete
P16-28 Set Screw for Handle of C/C
P16-29 Adjusting Washer for C/C
P16-3 Stop
P16-3S Set of 6 Stops
P16-4 Stop Lock Screw
P16-5 Master Collet for No. 16 Chuck Changer
P16-6 Special Collet
P16-7R Clutch Spring Right
P16-8 Collet Wrench
P16-9H Red Cushion Grip for Handle
P16-9SH Steel Handle for 16
P16-ADRW Red Wing Adapter
