Compare Handler Dust Collectors & Polishing Units
Dust Collection & Polishing Units
One size dust collector does not fit all. Browse all 33 units below, or narrow by number of users, by category, or by what matters most to your lab. Every unit shows its airflow, how many workstations it supports, and how the filter is serviced.
550
Porta-Vac Bench-Top Dust Collector
Material recoverable
- Airflow
- 80 CFM
- Workstations
- 1
- Filter service
- Removable clean-out tray; washable, reusable pleated filter
Full specifications
- Application
- Light dry grinding/polishing with handpiece or lathe
- Placement
- Bench top
- Filtration
- Reusable/replaceable pleated cartridge; captures ≥0.5 micron
- Dimensions
- 8.5 W × 12 H × 14 D in
- Shipping weight
- 18 lb ship
- Metal recovery
- Removable clean-out tray
- Replacement filters
- 550-F
62 $
Super Sucker Dust Collector
Disposable filterNot for aluminum oxide
- Airflow
- 225 CFM
- Workstations
- Up to 2
- Filter service
- Disposable paper filter, plus polyester and activated charcoal stages
Full specifications
- Application
- Intermittent dry grinding/polishing; two bench stations; not for aluminum oxide
- Placement
- Under bench / floor adjacent
- Filtration
- Disposable paper primary + polyester secondary + activated charcoal odor filter
- Dimensions
- 14.75 W × 8.5 D × 17.375 H in
- Shipping weight
- 36 lb ship
- Metal recovery
- Disposable filter — captured material is discarded with it
62-0 $$
Super Sucker Dust Collector without fishmouths
Disposable filterNot for aluminum oxide
- Airflow
- 225 CFM
- Workstations
- Up to 2
- Filter service
- Disposable paper filter, plus polyester and activated charcoal stages
Full specifications
- Application
- Same as Model 62 when customer supplies own suction inlets
- Placement
- Under bench / floor adjacent
- Filtration
- Disposable paper primary + polyester secondary + activated charcoal odor filter
- Dimensions
- 14.75 W × 8.5 D × 17.375 H in
- Shipping weight
- 36 lb ship
- Metal recovery
- Disposable filter — captured material is discarded with it
62-II $$
Super Sucker II
Disposable filterAluminum oxide OK
- Airflow
- 110 CFM
- Workstations
- 1
- Filter service
- Disposable HEPA bag, easily removable; internal charcoal filter
Full specifications
- Application
- Continuous-duty light dry grinding/polishing; single workstation
- Placement
- Under bench
- Filtration
- Disposable HEPA: captures to 0.3 micron + activated charcoal odor filter
- Dimensions
- 10 W × 15.5 D × 13 H in
- Shipping weight
- 35 lb ship
- Metal recovery
- Disposable HEPA bag — captured material is discarded with it
MAFH25
Filter Hood with Light
Material recoverable
- Airflow
- 80 CFM
- Workstations
- 1
- Filter service
- Three replaceable filters (pleated, polyester, charcoal) — easy to change
Full specifications
- Application
- Light grinding/polishing; precious-metal dust capture; companion to M.BL, flex shaft or micromotor
- Placement
- Bench top
- Filtration
- Three-stage replaceable media options: pleated, polyester, carbon/poly
- Dimensions
- 6 W × 12.75 D × 7.5 H in
- Shipping weight
- 9 lb
- Metal recovery
- Filters are designed to be changed and shipped to a refiner
- Replacement filters
- MAFH120
550A $
Under Bench Porta-Vac Dust Collector
Disposable filterAluminum oxide OK
- Airflow
- 125 CFM
- Workstations
- 1
- Filter service
- Disposable HEPA filter
Full specifications
- Application
- Light-duty dry grinding; connects to remote suction inlet/hood
- Placement
- Under bench
- Filtration
- Disposable HEPA; captures to 0.3 micron
- Dimensions
- 14.5 L × 9.25 W × 11.5 H in
- Shipping weight
- 20 lb
- Metal recovery
- Disposable HEPA filter — captured material is discarded with it
- Replacement filters
- 62-IIDF
550A-KIT $
Under Bench Porta-Vac + Compact Hood Kit
Disposable filterAluminum oxide OK
- Airflow
- 125 CFM
- Workstations
- 1
- Filter service
- Disposable HEPA filter
Full specifications
- Application
- Complete compact dry-grinding dust collection setup
- Placement
- Under bench + bench hood
- Filtration
- Disposable HEPA; captures to 0.3 micron
- Dimensions
- Collector: 14.5 L × 9.25 W × 11.5 H in; Hood: 8.5 W × 6.625 H × 5.25 D in
- Shipping weight
- 30 lb collector (site spec)
- Metal recovery
- Disposable HEPA filter — captured material is discarded with it
- Replacement filters
- 62-IIDF
100C $
Pro Tech Elite Dust Extraction System
Aluminum oxide OK
- Airflow
- 150 CFM
- Workstations
- 1
- Filter service
- HEPA drum cartridge plus secondary air filter
Full specifications
- Application
- Dry CAD/CAM milling: zirconia, wax, PMMA, composite, PEEK, gypsum, porcelain, glass-fiber resin
- Placement
- Under bench
- Filtration
- 2-stage: HEPA drum cartridge + air filter
- Dimensions
- 11.3 W × 11.6 L × 19 H in
- Shipping weight
- 30 lb
- Replacement filters
- P100C-UF
200C $$
Pro Tech Elite Dust Extraction System
Aluminum oxide OK
- Airflow
- 150 CFM
- Workstations
- 1
- Filter service
- HEPA drum cartridge, ULPA and secondary air filter
Full specifications
- Application
- Dry CAD/CAM milling: zirconia, wax, PMMA, composite, PEEK, gypsum, porcelain, glass-fiber resin
- Placement
- Under bench
- Filtration
- 3-stage: HEPA drum cartridge + ULPA (99.9995% to 0.12 µm) + air filter
- Dimensions
- 11.3 W × 11.6 L × 29 H in
- Shipping weight
- 30 lb
- Replacement filters
- P100C-UF
MADC20 $$
Dust Collector with Cyclone and Collection Chamber
Best for metal recoveryAluminum oxide OK
- Airflow
- 115 CFM
- Workstations
- 1
- Filter service
- Cyclone pre-filter with clear collection chamber; HEPA filters
Full specifications
- Application
- Dry grinding, polishing, deburring and sanding of metal, wood, stone, die stone, plaster, etc.
- Placement
- Floor / mobile on casters
- Filtration
- Cyclone pre-filter + HEPA/MERV 16; HEPA captures 99.8% at 0.3 micron and larger
- Dimensions
- 15.25 W × 15.25 L × 19.5 H in
- Shipping weight
- 30.5 lb
- Metal recovery
- Cyclone with clear collection chamber — debris separated before the filter
60UFC $$
Dual Work Station Dust Collector
Material recoverable
- Airflow
- 400 CFM
- Workstations
- Up to 2
- Filter service
- Drum cartridge filters — easy to clean, easy to replace
Full specifications
- Application
- Continuous-duty dental/jewelry grinding and polishing
- Placement
- Floor / under bench area
- Filtration
- Drum cartridge filtration; captures ≥0.5 micron
- Dimensions
- 15.125 W × 14.875 D × 22 H in
- Shipping weight
- 80 lb ship
- Metal recovery
- Drum cartridges can be emptied rather than discarded
- Replacement filters
- 60UDC
77DC $$$
Dyna-Vac Central Dust Collector
Material recoverable
- Airflow
- 600 CFM
- Workstations
- Up to 3
- Filter service
- Two 60FC drum cartridges — clean with dry compressed air from the inside out, under 20 PSI
Full specifications
- Application
- Central dust collection for 3–4 grinding/polishing workstations
- Placement
- Floor / central system
- Filtration
- Dual drum cartridge filtration; captures ≥0.5 micron
- Dimensions
- 24 W × 20 D × 38.5 H in
- Shipping weight
- 240 lb ship
- Metal recovery
- Bottom tray plus removable cartridges; the manual says to keep used cartridges and dust together for reclamation
- Replacement filters
- 60FC
101 $$$
Central Dust Collector
- Airflow
- 800 CFM
- Workstations
- Up to 4
Full specifications
- Application
- High-volume central dust collection for up to four workstations
- Placement
- Floor / central system
- Filtration
- Dual drum cartridge filtration; captures ≥0.5 micron
- Dimensions
- 26 W × 24 D × 41 H in
- Shipping weight
- 270 lb ship
575 $$
Multi-Functional Bench Top Polishing System with 26A Lathe
- Airflow
- 225 CFM
- Work positions
- 2 — one operator
Full specifications
- Application
- Dry grinding and pumice polishing in dental, jewelry and industrial labs
- Placement
- Bench top
- Filtration
- Two reusable/replaceable pleated cartridge filters; captures ≥0.5 micron
- Dimensions
- 32 W × 16 H × 21 D in
- Shipping weight
- 115 lb ship
- Replacement filters
- 550-F
575-0 $$
Bench Top Polishing System without lathe
- Airflow
- 225 CFM
- Work positions
- 2 — one operator
Full specifications
- Application
- Same polishing/dust collection workstation when user supplies polishing motor
- Placement
- Bench top
- Filtration
- Two reusable/replaceable pleated cartridge filters; captures ≥0.5 micron
- Dimensions
- 32 W × 16 H × 21 D in
- Shipping weight
- 75 lb ship
- Replacement filters
- 550-F
76D-3 $$
Bench Top Polishing Unit
Not for aluminum oxide
- Airflow
- 365 CFM
- Work positions
- 2 — one operator
Full specifications
- Application
- Light polishing/grinding with integrated work area; not recommended for gypsum or aluminum oxide
- Placement
- Bench top
- Filtration
- Two 10 x 12 x 2 fiberglass filters; captures approx. 5–10 micron
- Dimensions
- 29 W × 20.5 D × 13 H in
- Shipping weight
- 105 lb ship
- Replacement filters
- 76D-F
76E $
Single Position Polishing Unit
- Airflow
- 150 CFM
- Workstations
- 1
Full specifications
- Application
- Compact single-spindle polishing
- Placement
- Bench top
- Filtration
- 10 × 13 × 2 in fiberglass filter
- Dimensions
- 13.5 W × 18 D × 10.125 H in
- Shipping weight
- 41 lb ship
- Replacement filters
- 76EF
76M $
Mid-Sized Polishing Unit
- Airflow
- 1/2 HP double-shaft polishing motor
- Work positions
- 2 — one operator
Full specifications
- Application
- General two-sided polishing with double-shaft motor
- Placement
- Bench top
- Filtration
- 20 × 12 × 2 in fiberglass filter
- Dimensions
- 20.5 W × 19.75 D × 12.5 H in
- Shipping weight
- 53 lb ship
- Replacement filters
- 76MF
600JP $$$
Multifunctional Polishing Unit
- Airflow
- 400 CFM
- Work positions
- 2 — one operator
Full specifications
- Application
- Continuous professional polishing and grinding with large lighted hoods
- Placement
- Floor-standing workstation
- Filtration
- Drum cartridge filtration; captures ≥0.5 micron
- Dimensions
- 32 W × 24 D in footprint; 30 in work height
- Shipping weight
- 250 lb ship
- Replacement filters
- 60UFB
60FC-TS $$$
Dual-Station Polishing Unit with Model 26 Red Wing Lathe
- Airflow
- 500 CFM
- Work positions
- 2 — one operator
Full specifications
- Application
- High-volume polishing: plaster, stone, pumice, tripoli rouge
- Placement
- Floor-standing workstation
- Filtration
- Dual drum cartridge filtration; captures ≥0.5 micron
- Dimensions
- 56 H × 18 D × 32 W in; 38 in bench height
- Shipping weight
- 300 lb ship
- Replacement filters
- 60FC
60FC-1-TS $$$
Large-Hood Polishing & Grinding Unit with Model 26 Lathe
- Airflow
- 500 CFM
- Work positions
- 2 — one operator
Full specifications
- Application
- Professional dry polishing/grinding; larger hoods for seated or standing work
- Placement
- Floor-standing workstation
- Filtration
- Dual drum cartridge filtration; captures ≥0.5 micron
- Dimensions
- 56 H × 42 W × 24 D in; 38 in bench height
- Shipping weight
- 360 lb ship
- Replacement filters
- 60FC
75D-FC $$$
Heavy-Duty Polishing & Grinding Unit with Model 26 Lathe
Material recoverable
- Airflow
- 600 CFM
- Work positions
- 2 — one operator
- Filter service
- Two 60FC drum cartridges — clean with dry compressed air from the inside out, under 20 PSI
Full specifications
- Application
- High-volume dry grinding, model grooving/trimming and polishing
- Placement
- Floor-standing workstation
- Filtration
- Dual drum cartridge filtration; captures ≥0.5 micron
- Dimensions
- 56 H × 32 W × 24 D in; 40 in work height
- Shipping weight
- 350 lb ship
- Metal recovery
- Bottom tray plus removable cartridges; the manual says to keep used cartridges and dust together for reclamation
- Replacement filters
- 60FC
75-2 $$$
Dyna Series Polishing Unit
Material recoverable
- Airflow
- 600 CFM
- Work positions
- 2 — one operator
- Filter service
- Cloth filter bags (75FB) — shake weekly with the external shaker handle, replace yearly
Full specifications
- Application
- High-capacity dental, jewelry and industrial polishing with precious-dust collection
- Placement
- Floor-standing workstation
- Filtration
- 24 shakeable cloth filter bags; 62 sq ft filter area
- Dimensions
- 56 H; work surface 40 H × 48 W × 28 D in
- Shipping weight
- 350 lb ship
- Metal recovery
- Large dust tray catches grindings shaken from the bags; the manual says to retain precious grindings for reclamation
- Replacement filters
- 75FB
52CSU $
Etcher Catcher Sand Blaster
Material recoverableAluminum oxide OK
- Airflow
- Integrated suction; enclosed capture
- Workstations
- 1
- Filter service
- Cleanable, reusable cartridge filter
Full specifications
- Application
- Aluminum-oxide etching/sandblasting and contained handpiece grinding
- Placement
- Bench top / enclosed chamber
- Filtration
- Reusable/replaceable pleated cartridge; captures ≥0.5 micron
- Dimensions
- 11 W × 9.875 D × 9.875 H in
- Shipping weight
- 17 lb ship
- Metal recovery
- Reusable cartridge — captured material stays recoverable
- Replacement filters
- 52-FP
A-WTSB10 $
Wolf Sand Blaster
Aluminum oxide OK
- Airflow
- Compressed-air abrasive blasting system
- Workstations
- 1
Full specifications
- Application
- Enclosed abrasive blasting/surface preparation for jewelry and precision bench work
- Placement
- Bench top / enclosed chamber
- Filtration
- Enclosed blasting cabinet; requires external compressed-air source
- Dimensions
- Outer: 16 W × 15.6 D × 17.8 H in; Inner: 6.7 W x 5.6 D x 6.8 H in
- Shipping weight
- 26 lb
100-MFW $$
Pro Tech Elite Multi-Functional Workstation
Aluminum oxide OK
- Airflow
- 150 CFM
- Workstations
- 1
- Filter service
- HEPA drum cartridge plus secondary air filter
Full specifications
- Application
- Enclosed dental lab finishing/polishing, aluminum oxide sandblasting, zirconia; jewelry fabrication/repair; precision grinding, sanding and cleaning
- Placement
- Bench-top work chamber + 100C under bench
- Filtration
- 2-stage 100C system: HEPA drum cartridge + secondary air filter
- Dimensions
- Work chamber: 21.3 W × 19.7 D × 13.2 H in; 100C: 11.3 W × 11.6 L × 19 H in
- Shipping weight
- 35 lb overall
- Replacement filters
- P100C-UF
200-MFW $$
Pro Tech Elite Multi-Functional Workstation
Aluminum oxide OK
- Airflow
- 150 CFM
- Workstations
- 1
- Filter service
- HEPA drum cartridge, ULPA and secondary air filter
Full specifications
- Application
- Enclosed dental lab finishing/polishing, aluminum oxide sandblasting, zirconia; jewelry fabrication/repair; precision grinding, sanding and cleaning
- Placement
- Integrated mobile workstation on 200C base
- Filtration
- 3-stage 200C system: HEPA drum cartridge + ULPA (99.9995% to 0.12 µm) + secondary air filter
- Dimensions
- Overall: 21.3 W × 19.7 D × 43 H in; 200C: 11.3 W × 11.6 L × 29 H in
- Shipping weight
- 35 lb overall
- Replacement filters
- P100C-UF
MALC15 $
Lighted Work Chamber
Add-on — needs a separate collector
- Airflow
- Dust-collection chamber; compressed-air nozzle up to 90 PSI; 2.25 in vacuum port
- Workstations
- 1
Full specifications
- Application
- Semi-enclosed chamber for grinding, sanding, polishing and drilling small workpieces; use with MADC20 or other dust collector and compressed air
- Placement
- Bench top
- Filtration
- Connects to external dust collection; acrylic shields contain dust/debris
- Dimensions
- Outer: 11.5 H × 11 W × 10 D in; Inner: 8 H × 10.25 W × 6.5 D in
- Shipping weight
- 11 lb
MALC30 $
Jumbo Work Chamber with LED Light
Add-on — needs a separate collectorMaterial recoverable
- Airflow
- 2.25 in vacuum-hose connection; 200-lumen LED work light
- Workstations
- 1
- Filter service
- Removable debris tray
Full specifications
- Application
- Semi-enclosed chamber for grinding, sanding, polishing and drilling small-to-medium workpieces; use with MADC20 or other dust collection system
- Placement
- Bench top
- Filtration
- Connects to external dust collection; removable debris tray and acrylic shield
- Dimensions
- Outer: 21 H × 22.75 W × 23 D in
- Shipping weight
- 19 lb including light
- Metal recovery
- Removable debris tray
750A $
Sani-Vac Dust Collector
Disposable filter
- Airflow
- Vacuum suction; foot-controlled
- Workstations
- 1
- Filter service
- Disposable HEPA cartridge
Full specifications
- Application
- Chairside clinical/podiatry dust and debris capture
- Placement
- Mobile / chairside
- Filtration
- Disposable HEPA; captures to 0.3 micron
- Dimensions
- 14.5 L × 9.25 W × 11.5 H in
- Shipping weight
- 26 lb ship
- Metal recovery
- Disposable HEPA cartridge -- captured material is discarded with it
- Replacement filters
- 62-IIDF
PTL-1 $$$
PTL-1 Pro Tech Lite Work Station
Includes the 550A
- Airflow
- 125 CFM
- Workstations
- 1
- Filter service
- Disposable HEPA filter, easy to access
Full specifications
- Placement
- Workstation
- Dimensions
- 42" W x 24" D x 54" H
- Shipping weight
- 250 lbs
- Replacement filters
- 62-IIDF
PTL-215SP $$$
PTL-215SP Pro Tech Lite Workstation
Includes the 62-II
- Airflow
- 110 CFM
- Workstations
- 1
- Filter service
- Disposable HEPA bag
Full specifications
- Placement
- Pedestal bench
- Dimensions
- 42" W x 30" D x 32" H
- Shipping weight
- —
PTL-215WS $$$
PTL-215WS Two-Person Workstation
Includes the 60UFC
- Airflow
- 400 CFM
- Workstations
- Up to 2
- Filter service
- Drum cartridge filters — easy to clean
Full specifications
- Placement
- Pedestal bench
- Dimensions
- 42" W x 49" D x 32" H
- Shipping weight
- 500 lbs
- Replacement filters
- 60UDC
Call 800-272-2885 or email
[email protected] and we will help you choose.
| Filter part | Description | Fits these units | Units |
|---|---|---|---|
| 62-IIDF | Disposable HEPA Filter Bag - Set of 3 | 62-II, 550A, 550A-KIT, 750A, PTL-1, PTL-215SP | 6 |
| 60FC | Pleated Drum Cartridge Filter - the current 101 takes two (also sold as 101FC) | 77DC, 101, 60FC-TS, 60FC-1-TS, 75D-FC | 5 |
| P100C-UF | Ulpa Filter For 100C & 200C DC | 100C, 200C, 100-MFW, 200-MFW | 4 |
| 550-F | Filter For 550 | 550, 575, 575-0 | 3 |
| 60UDC | Drum Cartridge Filter | 60UFC, PTL-215WS | 2 |
| 62-IICF | Charcoal Filter | 62-II, PTL-215SP | 2 |
| 62-IIFB | — | 62-II, PTL-215SP | 2 |
| 62CF | Charcoal Filter, #62 Sup/Skr | 62, 62-0 | 2 |
| 62DF | Disposable Filter #62 (Set of 6) | 62, 62-0 | 2 |
| 62PF | Polyester Filter/No62 Sup/Skr | 62, 62-0 | 2 |
| 101FB | Filter Bags - for older bag-filter 101 units | 101 | 1 |
| 52-FP | Filter | 52CSU | 1 |
| 60UFB | - Sateen Cotton Cloth Filter Bags, Set of 14 | 600JP | 1 |
| 75FB | Filter Bags For 75/77 Series | 75-2 | 1 |
| 76D-F | Filter for 76D 10 X12 X 2, 2/Pkg | 76D-3 | 1 |
| 76EF | Filter for 76E,10 X 13 X 2" | 76E | 1 |
| 76MF | — | 76M | 1 |
| MADC205 | HEPA Filter | MADC20 | 1 |
| MADC208 | Canister Filter | MADC20 | 1 |
| MAFH120 | Replacement Filters, 5 per pack | MAFH25 | 1 |
| Model | Product | Category | Workstations | Airflow | Filter service | Replacement filters | Metal recovery |
|---|---|---|---|---|---|---|---|
| 550 | Porta-Vac Bench-Top Dust Collector | Small | 1 | 80 CFM | Removable clean-out tray; washable, reusable pleated filter | 550-F | Recoverable |
| 62 | Super Sucker Dust Collector | Small | Up to 2 | 225 CFM | Disposable paper filter, plus polyester and activated charcoal stages | 62CF, 62DF, 62PF | Disposable filter |
| 62-0 | Super Sucker Dust Collector without fishmouths | Small | Up to 2 | 225 CFM | Disposable paper filter, plus polyester and activated charcoal stages | 62CF, 62DF, 62PF | Disposable filter |
| 62-II | Super Sucker II | Small | 1 | 110 CFM | Disposable HEPA bag, easily removable; internal charcoal filter | 62-IIDF, 62-IICF, 62-IIFB | Disposable filter |
| MAFH25 | Filter Hood with Light | Small | 1 | 80 CFM | Three replaceable filters (pleated, polyester, charcoal) — easy to change | MAFH120 | Recoverable |
| 550A | Under Bench Porta-Vac Dust Collector | Small | 1 | 125 CFM | Disposable HEPA filter | 62-IIDF | Disposable filter |
| 550A-KIT | Under Bench Porta-Vac + Compact Hood Kit | Small | 1 | 125 CFM | Disposable HEPA filter | 62-IIDF | Disposable filter |
| 100C | Pro Tech Elite Dust Extraction System | Small | 1 | 150 CFM | HEPA drum cartridge plus secondary air filter | P100C-UF | — |
| 200C | Pro Tech Elite Dust Extraction System | Medium | 1 | 150 CFM | HEPA drum cartridge, ULPA and secondary air filter | P100C-UF | — |
| MADC20 | Dust Collector with Cyclone and Collection Chamber | Medium | 1 | 115 CFM | Cyclone pre-filter with clear collection chamber; HEPA filters | MADC205, MADC208 | Cyclone collection chamber |
| 60UFC | Dual Work Station Dust Collector | Medium | Up to 2 | 400 CFM | Drum cartridge filters — easy to clean, easy to replace | 60UDC | Recoverable |
| 77DC | Dyna-Vac Central Dust Collector | Large | Up to 3 | 600 CFM | Two 60FC drum cartridges — clean with dry compressed air from the inside out, under 20 PSI | 60FC | Recoverable |
| 101 | Central Dust Collector | Large | Up to 4 | 800 CFM | — | 101FB, 60FC | — |
| 575 | Multi-Functional Bench Top Polishing System with 26A Lathe | Polishing unit | 1 (2 positions) | 225 CFM | — | 550-F | — |
| 575-0 | Bench Top Polishing System without lathe | Polishing unit | 1 (2 positions) | 225 CFM | — | 550-F | — |
| 76D-3 | Bench Top Polishing Unit | Polishing unit | 1 (2 positions) | 365 CFM | — | 76D-F | — |
| 76E | Single Position Polishing Unit | Polishing unit | 1 | 150 CFM | — | 76EF | — |
| 76M | Mid-Sized Polishing Unit | Polishing unit | 1 (2 positions) | 1/2 HP double-shaft polishing motor | — | 76MF | — |
| 600JP | Multifunctional Polishing Unit | Polishing unit | 1 (2 positions) | 400 CFM | — | 60UFB | — |
| 60FC-TS | Dual-Station Polishing Unit with Model 26 Red Wing Lathe | Polishing unit | 1 (2 positions) | 500 CFM | — | 60FC | — |
| 60FC-1-TS | Large-Hood Polishing & Grinding Unit with Model 26 Lathe | Polishing unit | 1 (2 positions) | 500 CFM | — | 60FC | — |
| 75D-FC | Heavy-Duty Polishing & Grinding Unit with Model 26 Lathe | Polishing unit | 1 (2 positions) | 600 CFM | Two 60FC drum cartridges — clean with dry compressed air from the inside out, under 20 PSI | 60FC | Recoverable |
| 75-2 | Dyna Series Polishing Unit | Polishing unit | 1 (2 positions) | 600 CFM | Cloth filter bags (75FB) — shake weekly with the external shaker handle, replace yearly | 75FB | Recoverable |
| 52CSU | Etcher Catcher Sand Blaster | Specialty / accessory | 1 | Integrated suction; enclosed capture | Cleanable, reusable cartridge filter | 52-FP | Recoverable |
| A-WTSB10 | Wolf Sand Blaster | Specialty / accessory | 1 | Compressed-air abrasive blasting system | — | — | — |
| 100-MFW | Pro Tech Elite Multi-Functional Workstation | Specialty / accessory | 1 | 150 CFM | HEPA drum cartridge plus secondary air filter | P100C-UF | — |
| 200-MFW | Pro Tech Elite Multi-Functional Workstation | Specialty / accessory | 1 | 150 CFM | HEPA drum cartridge, ULPA and secondary air filter | P100C-UF | — |
| MALC15 | Lighted Work Chamber | Specialty / accessory | 1 | Dust-collection chamber; compressed-air nozzle up to 90 PSI; 2.25 in vacuum port | — | — | — |
| MALC30 | Jumbo Work Chamber with LED Light | Specialty / accessory | 1 | 2.25 in vacuum-hose connection; 200-lumen LED work light | Removable debris tray | — | Recoverable |
| 750A | Sani-Vac Dust Collector | Specialty / accessory | 1 | Vacuum suction; foot-controlled | Disposable HEPA cartridge | 62-IIDF | Disposable filter |
| PTL-1 | PTL-1 Pro Tech Lite Work Station | Bench with built-in collection | 1 | 125 CFM | Disposable HEPA filter, easy to access | 62-IIDF | — |
| PTL-215SP | PTL-215SP Pro Tech Lite Workstation | Bench with built-in collection | 1 | 110 CFM | Disposable HEPA bag | 62-IIDF, 62-IICF, 62-IIFB | — |
| PTL-215WS | PTL-215WS Two-Person Workstation | Bench with built-in collection | Up to 2 | 400 CFM | Drum cartridge filters — easy to clean | 60UDC | — |
Not sure which one? Call us at 800-272-2885 or email
[email protected].