32X Model Trimmer
Price range: $1,119.31 through $1,548.23
A 12” diameter Model Trimmer powered by a 1/3 HP ball bearing, capacitor start motor for those desiring lower pricing and lower torque. The swing-open front housing with full wheel radius water spray, internal gutter for water diversion, surrounding drip trough, and motor cover, make this trimmer an excellent addition to the working laboratory. Shipped complete, ready to use with minor setup; finished with a durable, baked coating.
115V/60Hz. Also available in 230V/50Hz, 230V/60Hz and 115V/50Hz at additional cost.
Shipping Wgt.: 55 lbs [22.7 Kg]
Unit Dimensions: 16” D x 15” W x 14 1/2” H [41cm x 38cm x 37cm]
| Weight | 55 lbs. [22.7 Kg] |
|---|---|
| Dimensions | 16” D x 15” W x 14 1/2” H [41cm x 38cm x 37cm] |
| Composition: | aluminum housing, steel motor base and cover |
| Options: | Available in 1/2 HP See Model 32 |
32X MODEL TRIMMER
Model Trimmer Options:
32X-SV with solenoid valve
32X-WKD with diamond wheel
115V/60Hz. Also available in 230V/50Hz, 230V/60Hz and 115V/50Hz at additional cost.
Shipping Wgt.: 55 lbs. [22.7 Kg]
Unit Dimensions: 16” D x 15” W x 14 1/2” H [41cm x 38cm x 37cm]
P32-01 Motor for Trimmer 1/2Hp (32)
P32-01A Motor-Mt Bolts (4/Set)
P32-01B Motor Shaft Keyway
P32-01C Switch On/Off
P32-01D Motor-Line/Cord Set
P32-02 Motor-Base
P32-02A Rear Housing Bolts W/Washers
P32-03 Rear Housing – 12″
P32-03A Drain Hose Adapter
P32-03B Knob W/Stud F/Housing
P32-04 Brass Hub with Set Screw
P32-04A Washer Alum F/Mt
P32-04B Nut for Model Trimmer Hub
P32-05 Back Up Plate, 12″ Metal
P32-07A Tray Work F/Mt 32
P32-07B Knob W/Stud for Work Tray For 31 & 32
P32-07C Hinge Pin Stainless Steel
P32-07D Water Inlet Ftg
P32-07E Spray Tube For 12″ Trimmer
P32-07G Spray Tube Clean Out Plug
P32-08 Inlet Tube W/Faucet Adapter
P32-08A Faucet Adapter Only For 31’S And 32’S
P32-08B Water Inlet Tubing Only
P32-09 Drain Hose 42″
P32-10 Model Trimmer Wrenches (Set/2)
P32-11 Motor-Cover for Trimmer 12″
P32-12 Utility Tray Plastic For 32
P32-13 Plastic Knob Only for Door
P32-14 Stainless Stud Only
32A-C Wheel 12″ Mt Coarse
32-07GK Model Trimmer Gasket Kit
General Information:
12” diameter Model Trimmer
Performance: 1/3 HP ball bearing, capacitor start motor
Electrical Requirements: 115V/60Hz
Physical Specifications: 16” D x 15” W x 14 1/2” H
Construction: Aluminum housing, steel motor base and cover
Features and Accessories: Larger frontal opening and additional grinding capacity to trim models faster and easier, full wheel radius water spray, internal gutter for water diversion, surrounding drip trough, and motor cover
